Please use this identifier to cite or link to this item: https://dr.ddn.upes.ac.in//xmlui/handle/123456789/4199
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKumar, Ramesh-
dc.contributor.authorKumar, Ashwanien_US
dc.contributor.authorLaxmikanten_US
dc.contributor.authorDutt, Niteshen_US
dc.contributor.authorSingh, Varun Pratapen_US
dc.date.accessioned2023-07-04T08:15:23Z-
dc.date.available2023-07-04T08:15:23Z-
dc.date.issued2022-12-
dc.identifier.urihttps://doi.org/10.56896/IJMMST.2022.1.2.009-
dc.identifier.urihttp://hdl.handle.net/123456789/4199-
dc.descriptionPaper published in the journal - International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST); Vol. 1, Issue 2, page 22-30, 2022en_US
dc.description.abstractThe objective of this study is to optimise the cutting parameters in Turning Operation. For this objective Taguchi Method was used. S/N ratio, ANNOVA was used to investigate the cutting force components & Material removal rate (MRR). In results optimal cutting parameters were obtained and the factors affecting cutting performance were analysed. It was concluded that cutting parameters i.e. depth of cut has influence on cutting force and material removal rate.en_US
dc.language.isoenen_US
dc.publisherInternational Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST)en_US
dc.subjectPublished Papersen_US
dc.subjectMechanical Engineeringen_US
dc.subjectMaterial Removal Rateen_US
dc.titleCutting parameters optimization in turning operation using taguchi methoden_US
dc.typeArticleen_US
Appears in Collections:Published papers

Files in This Item:
File Description SizeFormat 
IJMMST_Vol 1 Issue 2_A9.pdf293.55 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.